Fire Rating – 90 Minutes
Frame – 25mm Beaded Frame Detail
Acoustic Rating – 33dB
Lock – Budget Lock
Finish – RAL 9010 30% Gloss
Fitting Method – QuickFit
This product is made bespoke to your exact specification.
This product is made bespoke to your exact specification.
The PAL57 is a wall-only Riser Door with a QuickFit sliding hinge system that allows for the quick and easy removal of the riser door from the frame. This allows the installation to be completed by a single person.
This riser door is constructed from 0.9mm zintec steel with a metal-faced panel. This Panel is 90 minute fire rated and has been tested in accordance with BSEN 1634-1: 2008 and BSEN 1363- 1 1999. It is certified to BS EN ISO 10140-2 2010 for a 33dB acoustic rating. This comes as standard with a 3 Way Locking system, other lock options are available.
The QuickFit hinge system replaces the full length piano hinge of the conventional riser door which reduces fitting time and costs.
The beaded frame allows for a wet finish (plaster) to be applied for a discrete finish.
Acoustic Rating | 33dB |
---|---|
Airtight Rated | No |
Anti-Ligature | No |
Brand | PALCO |
Door Type | Riser Door |
Fire Rating | 90 Minutes |
Fitting Style | QuickFit Fitting System |
Frame Type | Beaded |
Insulated | No |
Orientation | Walls |
Panel Face | Metal |
Smoke Tested | Yes |
To remove the door from the frame; Open the door, pull to release the FastFit Hinge System and lift out the door.
Place the frame into the aperture ensuring the aperture is 7mm larger than the panel size. Mark the position of the hinge and door retaining pins located towards the hinge side.
Remove the frame & drill clearance holes for Spring Pin hinge and door retaining pins, as previously marked.
Fix the frame into the aperture using all the fixing holes. Ensure frame is square by measuring diagonally & flush to the wall. If fire, acoustic or airtight rated apply Intumescent acrylic mastic on the rear of the frame jamb prior to installing the frame.
Refit the door, place the lower Spring Pin hinge system into its location. Slide the top pin along inside the frame until the hinge system locates fully then close the door. If fire, acoustic or airtight rated apply Intumescent acrylic mastic to the rear of the frame, nominally 5mm wide sealing to the supporting construction.
Lock the door in place with key provided & ensure the door is flush when closed. For a beaded framed panel, apply skrim tape prior to to plastering.