Fire Rating – None
Frame – 25mm Beaded Frame Detail
Lock Type – 3 Way Lock
Finish – RAL 9010 30% gloss
Fitting Method – QuickFit Fitting System
This product is made bespoke to your exact specification.
This product is made bespoke to your exact specification.
The PAL56 is a Riser Door that is suitable for installation in walls and ceilings.
This panel is constructed from 0.9mm zintec steel with a budget lock as standard but other locks are available. Although described as a riser door, this is a non-fire rated option.
The beaded frame allows a wet finish to be applied (plaster), allowing for a completely concealed installation, the only thing visible will be the lock cap.
Acoustic Rating | None |
---|---|
Airtight Rated | No |
Anti-Ligature | No |
Brand | PALCO |
Door Type | Riser Door |
Fire Rating | None |
Fitting Style | QuickFit Fitting System |
Frame Type | Beaded |
Insulated | No |
Orientation | Ceilings, Walls |
Panel Face | Plasterboard |
Smoke Tested | No |
Suitable Locks | Budget Lock |
To remove the door; Open the door, pull the spring hinge handle into the hinge stop then lift the door out.
Place the frame into the aperture ensuring the aperture is 7mm larger than the panel size. Mark the position of the hinge slots and if 3 point locking the locking bar slots as well.
Remove the frame & drill clearance holes for hinge slots and if 3 point locking the locking bar slots as well as previously marked.
Fix the frame into the aperture using all the fixing holes to secure in place. Ensure frame is square by measuring diagonally & flush to the ceiling. If fire, acoustic or airtight rated apply Intumescent acrylic mastic on the rear of the frame jamb prior to installing the frame.
Refit the door securing the spring pin hinges back in place ensuring the pins are fully inserted through the frame. Lock the door in place with key provided & ensure the door is flush when closed.
Apply skrim tape to the beaded frame & door prior to plastering. If fire, acoustic or airtight rated apply Intumescent acrylic mastic to the rear of the frame, nominally 5mm wide sealing to the supporting construction.
All sizes displayed are height x width.